Announcing our newest product line:

MICRO-KERF Blades

The "Two-In-One" saw blades that make you say "WOW"

Outperforms any thin kerf blade on the market!

Chip Free cutting with ease.

Total Saw Solutions is the leading manufacturer of the thinnest cutting carbide tipped saw blades in the world.

Why is the Micro-Kerf 40 the most logical tooling option?

All of the manufacturing components from the steel to the packaging are purchased in the USA.
Superior blade performance reduces energy consumption and material waste.
Micro-Kerf 40 is manufactured using the most sophisticated robotic machinery in the industry virtually eliminating human error.
The manufacturing process is also complimented by a series of quality checks to verify exact tool geometry.
Less chip removal equals less airborne sawdust which gives you better air quality in your shop.
A quieter saw means less decibels which protects the hearing of you, your family, and your co-workers.
This all equates to a magnificent cut every time while maximizing blade life between servicing.

What benefits can I expect to receive with my Micro-Kerf 40 blade?

This is a true industrial quality carbide tipped saw blade, made of the finest grades of metals.
It gives the best quality cuts in all woods and most plastics.
Replaces over 20 different styles and thicknesses of 10” table saw blades.
Eliminates most of the need for sanding.
Has the ability to cut paper thin strips of wood with ease.
Special tooth grind allows the blade to cut through knots.
Cuts thin as a dime (.062k) with extreme ease, leaving a very smooth finish.
The plate is fully hardened, laser cut, precision ground and tensioned with a run out less than ½ the thickness of your hair.
This blade has a built in dampening system that reduces vibrations, making cuts quieter and more precise, causing the saw blade to remain sharper longer.
This dampening system also acts as a heat sink. It draws the heat from the outer diameter of the saw blade and keeps the blade cutting straight.
Uses less electricity, less saw dust and therefore gives more profit.
90 day money back guarantee!
There is nothing like it!!
You will look for more wood to cut!!!

Can this saw be retipped?

Yes, because of the quality of steel from which this blade is made, it can be retipped many times.

What is the depth of cut?

It is capable of cutting 2-5/8" deep but we strongly recommend not more than 2" to keep the blade cooler. The blade tips need to be 1/2" above the work piece to give the best cutting performance.

How many times can this blade be sharpened?

10 to 15 times, depending upon how dull the blade is.

Can I have our local sharpening shop sharpen it?

We would not recommend it. It is too thin to take the risk of ruining it.

What is the cost to get this saw blade sharpened and hammered flat?

US$20 for Micro-Kerf40

What is the sharpening turn around time?

About one week, depending on the work load.

What was the push to get the Micro-kerf 40 developed?

We actually developed the beginning stages of this saw blade in the early 1990’s for the industrial wood cutting market. It was primarily used for multi-gang saw ripping applications. Because of the trend of our foreign trade policy in the late 1990’s, this caused most of this market to leave our shores to be manufactured in other countries. We chose not to follow this market overseas, but wanted to help the remaining struggling U.S. manufacturing companies perfect their cutting capabilities.

As a saw blade manufacturer, we realize that there are 3 distinct woodworking markets.

The industrial wood working market, which is made up of the primary and secondary wood cutting applications

The carpentry market (home builders)

The professional woodworkers market

Through the years many of the serious professional woodworkers have contacted us to encourage us to make a table saw blade similar to the high-performance ones we make for the industrial market. Their main complaint was that they were tired of buying low quality blades that keep them from producing consistent quality products. Since the shrinking of the industrial manufacturing base in this country, our company has decided to make a USA manufactured blade for the professional woodworkers market.

We view this group of craftsmen as survivors, much like the people who migrated to our country generations ago. These people sacrificed everything to come here in hopes of finding a better life. We believe the present day craftsman’s goal is to be an individual, using their God given abilities to be creative and artistic in their approach to woodworking.

Our goal at Total Saw Solutions is to get behind this group of craftsmen and bring them to the level of quality they desire. The Micro-kerf 40 is just the beginning of the quality products that will be available in the future. Our ability to sharpen and repair your old blades will be the final key in bringing your business up to the level of quality you desire. So send all your saw blades here to be sharpened.

Feel free to e-mail us with your recommendations for future saw blades.

PLEASE NOTE: We have found that raising the blade tips 1/2" up through the wood that you are cutting will give the best cutting results.

Micro-Kerf40 10" x 40T x 5/8" Bore, w/ 2-5/8" Cutting Depth Table Saw Blade (MK1040625)

$184.99 with a 90 Day Money Back Guarantee- Instructional DVD Included