Steel-Pro for Stainless Series
Now it is possible to cut stainless steel with greater efficiency on your low RPM metal-cutting saw
The Steel-ProR for Stainless Series is the result of nearly two years of intensive product testing. Never before has cutting stainless steel been so easy and economical. The TENRYU Steel-Pro® for Stainless blades allow you to cut a wide variety of stainless steel materials with:
- Greatly improved cutting speed
- Less burr on edges (resluting in tremendous time savings)
- No scorching of the stainless
- Reduced sparking
- Fewer blade changes
EACH BLADE FEATURES:
- Unique tooth design and geometry for smoother and easier cuts.
- New grade of carbide for longer cutting life in stainless steel.
- Resin bond-filled laser expansion slots for reduced vibration.
These blades, when used for the proper application, will save time and money.
| MODEL # | DIA. | TEETH | BORE | GRIND | KERF | HOOK | MAX RPM | APPLICATION | PRICE |
| CF-13556S**** | 5-3/8" | 56T | 20mm | MTCG | .043 | 0 | 3700 | Best for sheet stainless no thicker than 12 gauge. Not suitable for heavy stock | $86.40 |
| MODEL # | DIA. | TEETH | BORE | GRIND | KERF | HOOK | MAX RPM | APPLICATION | PRICE |
| SPS-18064**** | 7" | 64T | 20mm | MTCG | .063" | 0 | 4000 | Best for sheet stainless no thicker than 12 gauge. Not suitable for heavy stock | $122.00 |
| SPS-20372**** | 8" | 72T | 5/8" | MTCG | .071" | 0 | 4300 | Best for sheet stainless no thicker than 12 gauge. Not suitable for heavy stock | $140.40 |
| SPS-23080**** | 9" | 80T | 1" | MTCG | .071" | 0 | 3000 | Best for sheet stainless no thicker than 12 gauge. Not suitable for heavy stock | $150.00 |
| SPS-30578* | 12" | 78T | 1" | MTCG | .087" | 10 | 1700 | 1/8" to 1/4" wall thickness, angles, solid, etc. | $291.60 |
| SPS-30578A** | 12" | 78T | 1" | MTCG | .087" | 0 | 1700 | Up to 1/4" wall thickness of Tubing (Round or square) and Channels | $291.60 |
| SPS-35590* | 14" | 90T | 1" | MTCG | .087" | 10 | 1700 | 1/8" to 1/4" wall thickness, angles, solid, etc. | $324.00 |
| SPS-35590A** | 14" | 90T | 1" | MTCG | .087" | 0 | 1700 | Up to 1/4" wall thickness of Tubing (Round or square) and Channels | $324.00 |
| SPS-355120*** | 14" | 120T | 1" | MATB | .079" | -3 | 1700 | For Thin gauge(14-16 gauge) stock, great for tubing | $380.00 |
NOTE: * SPS-30578 and SPS-35590- Material wall thickness (1/8" to 1/4"), not designed for tubing; ** SPS-30578A and SPS-35590A- Material wall thickness up to 1/4", great for tubing; *** SPS-355120- Material wall thickness (very thin stock 14-16 gauge), great for tubing; ****CF-13556S, SPS-18064, SPS-20372, and SPS-23080- Material thickness 14-16 gauge, no thicker than 12 gauge, great for flat stock.
Usage requirements: All blades
- Use only low RPM Dry-cut saws only
- 303 & 304 stainless only
- Highly recommendable to use lubricant or stick wax
- Clamp material securely to base
Please note all safety instructions before use and adhere to instructions for maximum RPM speed.
ALWAYS WEAR EYE PROTECTION that meets ANSI Z87.1 requirements and properly FUNCTIONING UPPER and LOWER BLADE GUARDS.
