Heavy Metal Plus
Specially Engineered Alloy teeth provide exceptional cut-life and lowest cost per cut in the most demanding applications.
The Heavy Metal Plus Series is an evolution of the Heavy Metal in that it features the same super thin-kerf and grinds as the Heavy Metal Series, but features Tenryu's specially engineered alloy cutting tips to further extend cut-life in heavy load applications.
| MODEL # | DIA. | TEETH | BORE | GRIND | KERF | HOOK | MAX RPM | APPLICATION | PRICE |
| HMC-18036BW | 7" | 36T | 20mm | MTCG | .073" | 0 | 4000 | 1/8"-1/4" Wall Thickness | $64.80 |
| HMC-18536BW | 7-1/4" | 36T | 5/8" KO | MTCG | .073" | 0 | 4800 | 1/8"-1/4" Wall Thickness | $64.80 |
| HMC-20342BW | 8" | 42T | 5/8" | MTCG | .073" | 0 | 4300 | 1/8" or Thicker Stock | $86.40 |
| HMC-20342DM | 8" | 42T | 5/8" KO | TCG | .065" | -5 | 4300 | 1/8"-1/4" Wall Thickness | $86.40 |
| HMC-23048BW | 9" | 48T | 1" | MTCG | .073" | 0 | 3000 | 1/8" or Wall Thicker Stock | $90.80 |
| HMC-30554DX | 12" | 54T | 1" | MTCG | .087" | 2 | 2000 | 1/8"-1/2" Wall Thickness | $166.40 |
| HMC-35566DX | 14" | 66T | 1" | MTCG | .087" | 2 | 1800 | 1/8"-1/2" Wall Thickness | $180.00 |
Extended Heavy Metal Plus Series for general purpose. Thin kerf, more teeth, and Heavy Metal Plus Alloy teeth design for a wide variety of applications, from 20 gauge to 1/4" wall thickness.
| MODEL # | DIA. | TEETH | BORE | GRIND | KERF | HOOK | MAX RPM | APPLICATION | PRICE |
| HMC-30572DX | 12" | 72T | 1" | MTCG | .087" | 2 | 2000 | General purpose, 20 gauge- 1/4" wall thickness | $198.00 |
| HMC-35581DX | 14" | 81T | 1" | MTCG | .087" | 2 | 1800 | General purpose, 20 gauge- 1/4" wall thickness | $210.00 |
Please note all safety instructions before use and adhere to instructions for maximum RPM speed.
ALWAYS WEAR EYE PROTECTION that meets ANSI Z87.1 requirements and properly FUNCTIONING UPPER and LOWER BLADE GUARDS.
