Power Tool Series
Power Tool Series for the Contractor
Exceptional features and superior quality, Thin Kerf
TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 12" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.
BLADE FEATURES:
- Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
- High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
- Aggressive rake angles for maximum cutting speed and efficiency.
- Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
- Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
- Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
- Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
- Can be resharpened for extended blade life.
| MODEL # | DIA. | TEETH | BORE | GRIND | KERF | HOOK | MAX RPM | APPLICATION | PRICE |
| PT-10024 | 4" | 24T | 20mm | ATAF | .055" | 18 | 11000 | For woodworking on Makita 4" trim saw | $36.00 |
| PT-10006-1 | 4" | 6T | 22mm | FTG | .157" | 20 | 11000 | For very clean and accurate biscuit slots in all woods | $40.00 |
| PT-10006-2 | 4" | 6T | 22mm | ATAFR | .157" | 25/-15 | 11000 | For exceptionally clean and smooth biscuit slots in all woods | $48.00 |
| PT-11036 | 4-3/8" | 36T | 20mm | ATAF | .063" | 15 | 13800 | For fine trim work on corded Makita trim saws | $31.20 |
| PT-11536 | 4-1/2" | 36T | 3/8" | ATAF | .063" | 15 | 13200 | For clean and easy trim work on the Porter Cable trim saw | $32.40 |
| PT-14036 | 5-1/2" | 36T | 5/8", 1/2" | ATAF | .063" | 15 | 10800 | For fine and easy trim work on Makita trim saw | $31.20 |
| PT-15236 | 6" | 36T | 1/2" | ATAF | .063" | 15 | 9500 | For fine trim woodworking with Porter Cable trim saw | $31.20 |
| PT-16524 | 6-1/2" | 24T | 5/8"KO | ATB | .079" | 20 | 9250 | General woodworking with 6-1/2" corded, or cordless circular saws | $24.00 |
| PT-16540 | 6-1/2" | 40T | 5/8"KO | ATB | .079" | 20 | 9250 | Finish woodworking with 6-1/2" corded, or cordless circular saws | $34.00 |
| PT-18516B | 7-1/4" | 16T | 5/8"KO | ATB | .073" | 27 | 8300 | Our super fast framing and ripping blade with INSERTED teeth | $14.60 |
| PT-18524AM | 7-1/4" | 24T | 5/8"KO | ATB | .073" | 20 | 8300 | The AMIGO 24 tooth contractor blade. Fast and long cutting life | $12.50 |
| PT-18524P | 7-1/4" | 24T | 5/8"KO | ATB | .073" | 20 | 8300 | Great for wet, or pressure treated lumber. Green coating | $13.50 |
| PT-18524V | 7-1/4" | 24T | 5/8"KO | ATB | .073" | 20 | 8300 | The unique VARIABLE PITCH design for wood, pressure treated, or composite decking | $13.50 |
| PT-18540 | 7-1/4" | 40T | 5/8"KO | ATB | .073" | 27 | 8300 | Unique INSERT tooth design cross cutting blade | $25.00 |
| PT-18540B | 7-1/4" | 40T | 5/8"KO | ATAF | .063" | 18 | 8300 | Ultra thin-kerf for finish cross-cutting. Bulk packaged | $23.00 |
| PT-18540-T | 7-1/4" | 40T | 5/8"KO | ATB | .063" | 18 | 8300 | Ultra thin-kerf for finish cross/rip cutting | $28.00 |
| PT-20360 | 8" | 60T | 5/8"KO | ATAF | .087" | 5 | 7300 | Smooth finish woodworking with 8" saws. Also good for vertical panel saws | $63.60 |
| PT-21018 | 8-1/4" | 18T | 5/8"KO | ATB | .075" | 25 | 7300 | Fast ripping with circular, table, or chop saws, INSERTED tooth design | $27.20 |
| PT-21040 | 8-1/4" | 40T | 5/8"KO | ATB | .079" | 15 | 7300 | General woodworking with 8-1/4" saws | $30.20 |
| PT-21060 | 8-1/4" | 60T | 5/8"KO | ATAF | .079" | 12 | 7300 | Finish woodworking with 8-1/4" saws | $52.00 |
| PT-26036 | 10-1/4" | 36T | 5/8"KO | ATAF | .079" | 20 | 5870 | Ripping wood with Big Foot saw | $68.00 |
POWER TOOL SERIES FOR MITER & SLIDE MITER SAWS
The "PT" Series blades for miter or slide miter saws range in sizes from 8-1/2" for the popular Hitachi through 12" diameters. 14" blades for older saws can be found on in our Pro Series for Wood. 15" miter saw blades are available in our Miter-Pro Series.
NOTE: This series may also be used for crosscutting applications on table saws.
EACH BLADE FEATURES:
- Thin kerf design is easier on miter saw motors and brakes.
- Fully hardened, expertly tensioned tool steel bodies.
- Fine grain tungsten carbide tips with fine grit honing for keen edges.
- Excellent price/value
| MODEL # | DIA. | TEETH | BORE | GRIND | KERF | HOOK | MAX RPM | APPLICATION | PRICE |
| PT-21624 | 8-1/2" | 24T | 5/8" | ATB | .087" | 15 | 7000 | A fast cutting blade for use on 8-1/2" saws in thick wood | $41.60 |
| PT-21640 | 8-1/2" | 40T | 5/8" | ATB | .087" | 15 | 7000 | General woodworking | $48.00 |
| PT-21680 | 8-1/2" | 80T | 5/8" | ATAF | .087" | 10 | 7000 | Super smooth woodworking | $75.00 |
| PT-23040 | 9" | 40T | 5/8" | ATAF | .087" | 5 | 6400 | General woodworking 9" miter, or table saws | $65.00 |
| PT-25550 | 10" | 50T | 5/8" | ATAF | .091" | 15 | 5870 | UINSERTED TEETH. For use on miter saws. Great value | $48.00 |
| PT-25560 | 10" | 60T | 5/8" | ATB | .083" | 0 | 5870 | Used for miter or slide miter saws | $68.00 |
| PT-25560D | 10" | 60T | 5/8" | TCG | .087" | 10 | 5870 | Triple chip woodworking blade for man-made wood materials | $74.00 |
| PT-25572A | 10" | 72T | 5/8" | ATB | .098" | 15 | 5870 | Clean performance on miter saws | $74.00 |
| PT-25590 | 10" | 90T | 5/8" | ATAF | .091" | 10 | 5870 | Super smooth woodworking | $80.00 |
