Manufactured with a thicker plate for smoother and straighter cuts.  Have standard tapered mounting holes to fit 5/16” bolt with 82° tapering. Size of mounting holes may vary on the...

Manufactured with a thicker plate for smoother and straighter cuts.  Have standard tapered mounting holes to fit 1/4” bolt with 82° tapering. Size of mounting holes may vary on the...

Manufactured with a thicker plate for smoother and straighter cuts.  Have standard tapered mounting holes to fit 5/16” bolt with 82° tapering. Size of mounting holes may vary on the...

Manufactured with a thicker plate for smoother and straighter cuts.  Have standard tapered mounting holes to fit 5/16” bolt with 82° tapering. Size of mounting holes may vary on the...

Glue joint rip saws are designed for operations requiring an extra smooth cut, such as solid wood pieces that will be glued together. Use these blades for rip cuts only. Glue joint rip saws can be...

General Purpose saws are designed for general sizing and cutting of natural woods. A higher number of teeth provides a finer edge to the cut but should be used only on thinner material.

Combination saws are designed for all around use, when acceptable rips and crosscuts must be made with one saw blade. The larger gullets allow deeper cuts and efficient saw dust escape on rip cuts...

These saws are designed similar to the general purpose saw but with a negative hook angle to prevent grabbing. The negative hook is a safety feature to prevent the cutting material from climbing up...

General Purpose saws are designed for general sizing and cutting of natural woods. A higher number of teeth provides a finer edge to the cut but should be used only on thinner material.

These saws are designed for high production cutting of natural woods, plywood, chipboard, and MDF. The TCG teeth offer less wear than the ATB with nearly the same quality of cut.  This saw blade...

Non-Ferrous cutting saws with specially formulated carbide teeth makes cutting all kinds of non-ferrous metal simple and easy.  Cut sheets, extrusions, or light solids of aluminum, copper, and...

Manufactured with a thicker plate for smoother and straighter cuts.  Have standard tapered mounting holes to fit 5/16” bolt with 82° tapering. Size of mounting holes may vary on the...