Melamine Saw Blades
A higher angle on the top bevel (+30) gives this saw an extra sharp shearing action to slice through single or double sided laminates without chipping. These blades are good for laminates, melamine, coreboard and other composite materials. Made with Micro-Sheen C-4 sub-micron carbide for an extended life.
| MODEL # | DIA. | TEETH | BORE & PINHOLE | GRIND | KERF | PLATE | HOOK | PRICE |
| LM18036HF | 180mm | 36T | 30mm | **HF | 2.9mm | 2.0mm | -5 | $139.00 |
| LM864 | 8" | 64T | 5/8" | HATB | .118" | .079" | -5 | $112.25 |
| LMH22042* | 220mm | 42T | 30mm, 2/7/42 | **HF | 3.2mm | 2.2mm | 10 | $155.00 |
| LM22064* | 220mm | 64T | 30mm, 2/7/42 | HATB | 3.0mm | 2.2mm | -5 | $153.00 |
| LM2503080* | 250mm | 80T | 30mm, 2/7/42 | HATB | 3.2mm | 2.2mm | -5 | $119.25 |
| LM1048HF | 10" | 48T | 5/8" | **HF | .126" | .087" | 10 | $119.25 |
| LM1080X | 10" | 80T | 5/8" | HATB | .102" max. cut 1" | .071" | 0 | $130.25 |
| LM1080 | 10" | 80T | 5/8" | HATB | .126" | .087" | -5 | $112.25 |
| LM1080TCG | 10" | 80T | 5/8" | TCG | .126" | .087" | -5 | $130.25 |
| LMH30060 | 300mm | 60T | 30mm, 2 +2 PH | **HF | 3.2mm | 2.2mm | 10 | $190.25 |
| LM30080* | 300mm | 80T | 30mm, 2 +2 PH | HATB | 3.2mm | 2.2mm | -5 | $184.00 |
| LM30010* | 300mm | 100T | 30mm, 2 +2 PH | HATB | 3.2mm | 2.2mm | -5 | $201.75 |
| LM1280 | 12" | 80T | 1" | HATB | .134" | .094" | -5 | $182.00 |
| LM1210 | 12" | 100T | 1" | HATB | .134" | .094" | -5 | $204.00 |
| LM3503096 | 350mm | 96T | 30mm, 2+2 PH | HATB | 3.6mm | 2.8mm | -5 | $232.00 |
| LM1410 | 14" | 100T | 1" | HATB | .142" | .110" | -5 | $237.25 |
| LM1610 | 16" | 100T | 1" | HATB | .158" | .118" | -5 | $245.50 |
* For use on Holz-Her or Striebig vertical panel saw.
** Hollow Face Grind. Hollow Face Pinholes on 220mm are 2/7/42mm & on 300mm are 2/7/42 + 2/10/60mm
!
