TENRYU

TENRYU'S best value for your non-ferrous metal cutting needs. Thin Kerf. Very Economical.

The Alumi-Cut Series offers true quality and affordability.

These blades are available in a wide variety of sizes to fit most popular job sites and shop saws. Excellent results in aluminum, copper, brass, bronze and other non-ferrous metals. Even works well in many plastics. Also good for woodworking and plastic cutting when needed. Resharpenable for long life, the Alumi-Cut blades will help you improve your bottom line!

These blades are also an excellent choice for cutting laminate flooring (i.e.: PergoR, etc.) with slide-miters or table saws.

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• Appropriate triple-chip grind pattern for non-ferrous metals.
• Quality carbide ground to precision.

USE LUBRICATION when cutting!!

The BEST CHOICE for long lasting performance when cutting Fiber-Cement Board.
Fiber-Cement Board is a very abrasive material that wears down normal carbide very quickly. The TENRYU BOARD-PRO incorporates special grade carbide tips for longer life.

Also available: BOARD-PRO PLUS: Latest technology PCD (poly-crystalline diamond) for EXTENDED cutting life- especially for thick (stacked) material. PCD tips produce a smoother cut. Thicker plate on PCD for longer life.

EACH BLADE FEATURES:

• Perfectly-tensioned, hardened-tool steel plates for flat, true run.
• Selected quality carbide grade.
• Extra long blade life.
• Economically priced.
• LESS DUST than traditional blades produce.

EACH BLADE FEATURES:

• Perfectly-tensioned, hardened-tool steel plates for flat, true run.
• Selected quality PCD (Poly-Crystalline Diamond) faced tips for longer life.
• Extra long blade life.
• LOWER COST PER CUT!
• LESS DUST than traditional blades produce.

Cordless saw blades for cutting wood, plastic, aluminum and steel with the most popular cordless machine models are available- all with TENRYU quality!

EACH BLADE FEATURES:

• Ultra-thin, perfectly tensioned steel plates for true run. This saves precious battery power and life.
• Precision honed, high-grade carbide for easy, smooth cuts and long life.
• Tooth configurations to meet specific cutting material and thickness applications.

*Bulk packaged price sawblade not shipped in custom clamshell packaging. Ideal for large bulk orders at a discounted price. 

Complete line of steel cutting saw blades made especially for cordless saws, great for mechanical construction (Electrical, HVAC, Plumbing, etc.)

Each Blade Features:

• Thin-kerf, and user-friendly designed
• Select C6 carbide for easy and safe cuts

Please note all safety instructions before use and adhere to instructions for maximum RPM speed. 

ALWAYS WEAR EYE PROTECTION that meets ANSI Z87.1 requirements and properly FUNCTIONING UPPER and LOWER BLADE GUARDS.

Superior Cutting Performance

TENRYU's Gold Medal Series is one of the best all around blades. The Gold Medal Dado Set will only add to TENRYU's reputation as the brand of choice for fine woodworking. This set produces super-clean dado edges with an astoundingly flat bottom surface in wood materials and even in melamine.
BLADE AND CHIPPER FEATURES:

• Fully heat-treated saw plates for superior endurance under heavy load.
• Individually hand hammer-tensioned for flat and true runs.
• Fine-grit honing of ALL sides of teeth for sharp, easy cutting action and long life.
• Quality fine-grain carbide grade for longer life and easier resharpening.

Most likely the lightest feeding dado you will ever experience!

Please note all safety instructions before use and adhere to instructions for maximum RPM speeds.

GROOVE OPTIONS: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

NOTE: The part number for the complete set is GMD-20340.

*Outer cutters cannot be used individually. The actual kerf of each is approx. 1/8". Placed together, the result is exactly 1/4".

**TB/F indicates that the outside blades are top-beveled in one direction only. Flat-topped "raker" tips are utilized in a "4 and 1" grind pattern. The chippers are flat-top grind to produce the nice, flat dado bottom surface.

• Perfectly smooth flat bottom
• Extra 3/32 chipper for dadoing undersized veneer plywood
• Magnetic shims (.010", .012", .015") are included

Groove options (solid wood): 1/4", 5/16", 3/8" 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", and 29/32"

Groove options (veneer wood): 3/8", 5/8", and 3/4" (nominal thickness)

This is the top of the line choice for the serious craftsman who wants one superior table saw blade for most all woodworking.

Saw plate run-out less than .002" for flat true run. Built-in dampening system reduces vibration, making cuts quieter and more precise. Performs smooth, easy crosscuts and rips. Even does a great job on double sided laminates.

Carbide tip material is an extra hard, C-4 and super fine grain with corrosion inhibitors to give the keenest edge and longest sharp-life.

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel body for true and accurate cuts, meticulously hand hammer tensioned.
• A new grade of extra hard carbide resists both abrasive and chemical wear better than standard grades for longer life.
• Resin bond-filled expansion slots to absorb any vibration and for quieter cutting.
• TENRYU's fine grit honing ensures mirror finish on carbide for the keenest possible edges and a super clean cut.

Click the image to view enlarged chart.

These Blades ROCK! Take Your Pick! Two Great Options Specifically Designed for Heavy Gauge.

Tenryu's newest offering for your Metalworkers! Both the HEAVY METAL and the HEAVY METAL PLUS are designed for users seeking affordability, quick cutting, and long cut-life; especially in heavier mild steel profiles and plates. 

• Industrial staircases, railings, mezzanines, platforms, grating, trailers, strut, etc.
• Rigging, oil field services equipment
• Plant and Equipment Maintenance and Repair (MRO)

Good for Metal cutting saws (Evolution, SteelMax, MK Morse, Milwaukee, JEPSON, Makita, DeWALT, Worm-Drive circular saws, or other make)

Specially Engineered Alloy teeth provide exceptional cut-life and lowest cost per cut in the most demanding applications.

The Heavy Metal Plus Series is an evolution of the Heavy Metal in that it features the same super thin-kerf and grinds as the Heavy Metal Series, but features Tenryu's specially engineered alloy cutting tips to further extend cut-life in heavy load applications.

TENRYU's European industrial quality line for heavy duty applications.

EACH BLADE FEATURES:

• Select grade of carbide tip for better performance.
• Large European style tips.
• Heavy, European plate style resists deflection during cutting.
• Resin bond, laser slots to absorb and eliminate vibration to produce a cleaner, quieter, more efficient cut.
• Excellent blade life.

TENRYU's European industrial quality line for heavy duty applications.

EACH BLADE FEATURES:

• Select grade of carbide tip for better performance.
• Large European style tips.
• Heavy, European plate style resists deflection during cutting.
• Resin bond, laser slots to absorb and eliminate vibration to produce a cleaner, quieter, more efficient cut.
• Excellent blade life.

Click here to view the rest of the Industrial Blade Series Part 1 

Introducing the new IA Series

• Up to 20" Diameter
• Resin filled laser cut slots to reduce noise and reduce vibration
• Same market leading thin-kerf design to reduce cutting waste and improve sharp life
• Still excellent value

High prodcution performace for industrial Upcut Saws. 

• Thin kerf designed for higher prodcution with less heat generation
• TCG (Triple Chip Grind) grind for efficient cutting on wide variety of materials
• Signature resin filled laser slots for reducing the noise and the vibration
• Positive degree rake angle versatile design for extrusion, and solid materials

Specialty Grind for Thin Stock

TENRYU introduces an unique grind of non-ferrous cutting blade series for very thin stock, such as picture frame moulding, radiator fins or other thin-walled aluminum extruded materials.

The regular INDUSTRIAL SERIES for NON-FERROUS has the anti-noise and anti-vibration design. However, this specialty thin stock non-ferrous cutting blade series performs even quieter and with less vibration. There is almost no deformation of the material after cutting and much less high pitch noise during the cut.

TENRYU's European industrial quality line for heavy duty applications.

EACH BLADE FEATURES:

• Select grade of carbide tip for better performance.
• Large European style tips.
• Resin bond, laser slots to absorb and eliminate vibration to produce a cleaner, quieter, more efficient cut.
• Excellent blade life.

The Ultimate Single-Sided Laminate (Low Pressure/High Pressure) and Veneer-Faced Plywood Cutting Blade!

The Mel-Pro Series is a complete line of blades that solve problems associated with cutting laminated wood products. Additionally, veneer-faced plywood can be cut without splintering at more reasonable feed speeds than in the past.

FINER CUTS- Precision ground carbide teeth set on hand-tensioned tool steel bodies produce finer cuts without chipping and "bottom-side blowout".

QUIETER- Patented resin bond-filled expansion slots effectively absorb vibration and reduce noise.

LONGER LIFE- High-grade, extra-hard, micro-grain, anti-corrosive carbide teeth fight both chemical and abrasive wear to remain sharp longer. There are a lot of blades on the market that can cut melamine but only the TENRYU Mel-Pro can cut it chip free, quieter, easier and longer. 

Numerous requests for a better melamine blade prompted TENRYU to spend over a year of research and development to bring you the world's most advanced melamine cutting blade. The Mel-Pro features a fully hardened, expertly tensioned tool steel body that absorbs impact, remains flat and true, and resists excess heat buildup. The Mel-Pro's exclusive, red bond, resin filled expansion slots absorb vibration, reduce heat and permit the blade to run quieter than any other brand. The thin-kerf, mirror-like grind on super hard, specially designed carbide tips allow for lighter cuts and reduce friction heat buildup. The bottom line is your bottom line will look better when you reduce scrap, reduce sharpening costs and reduce noise in your shop with Mel-Pro blades.

Hi-ATB Melamine (Single/Double Sided Low Pressure Laminate)

EACH BLADE FEATURES:

• Hi-ATB design with negative (-5) rake angle tooth geometry - NO TEAR OUT!
• Traditional full-kerf, "European Style" blade design
• C-4 hardness, super fine grain, anti-corrosive carbide tips for the keenest edges and extended sharp life.

PREMIUM, INDUSTRIAL HI-ATB FEATURES:

• Specially developed, top-grade, super fine grain carbide tip.
• NEW: Additional, "resin-filled, laser cut body slots" succeed in vibration dampening to an even greater extent.
• Exhaustive, hand-hammer plate tensioning assures truer and smoother cuts.
• Longer Lasting.

TENRYU's ultimate woodworking blade for miter saws and sliding miter saws. 

TENRYU responds to customer demand! They now have a line of blades specially designed for high performance, smooth cuts and heavier duty applications on miter saws, slide-miter saws and radial arm saws. These are their "Cadillac/Mercedes" grade miter saw blades.

TENRYU'S proven, super-true, laser-cut, hand tensioned steel plate with new and improved, patented, resin bond-filled expansion slots ensures smooth, accurate and quiet cuts. Specially designed, top-quality, micrograin carbide tips, honed to a precision edge with 600 grit diamond wheels cut clean and easy. Zero degree hook angle prevents lifting of workpiece but does not make your saw overwork. The result is a safe, chip-free and smooth cut.

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• High-grade, fine grain carbide tips for long life.
• Super-fine grit honing of carbide edge for clean, smooth cuts.
• Additional resin bond-filled expansion slots for even quieter cutting.

All the features of the Miter-Pro series Plus newly added technological improvements to make them better and heavier-duty than ever.

• Finest and smoothest cuts ever on your miter or radial arm saws.
• Best suited blade for the latest Slide Miter Saws as well as traditional Miter Saws.
• Negative rake angle tooth design (-3 degree) - For finer cuts in thin or brittle materials.
• Reduced tendency to grab materials being cut.
• Additional, Resin-Filled Silencing Slots in plate eliminate troublesome vibration for smoother cuts, reduced noise and longer sharp-life.

TENRYU'S professionals' choice for high performance panel saw cutting. The same, superior features and benefits of Tenryu's Mel-Pro series in sizes to fit the most popular panel saws.

Excellent for long lasting, precise cuts in wood, wood composites, and laminated materials on panel saws.

Panel saws are often used to cut large sheets of "difficult" materials like MDF, melamine or particle board. These materials are laden with chemicals and adhesives which attack the carbide causing corrosion of the cutting edge. The Panel-Pro blades come equipped with Tenryu's best anti-corrosive micro-grain carbide. That, plus our super-flat, perfectly tensioned plate adds up to very precise, long lasting performance on your panel saw!

For cutting aluminum materials on panel saws, see Tenryu's Alumi-Cut Series blades. For cutting Solid Surface Materials, see Tenryu's Pro Series for Solid Surface.

Try these blades even without the scoring saw- you'll love the results!

EACH BLADE FEATURES:

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• High-grade, extra hard, wear-resistant carbide tips for long life.
• Fine grit honing of carbide edges for clean, smooth cuts.
• Resin bond-filled expansion slots for reduced vibration and quieter cutting.

* with pin-drive holes

TENRYU'S best value for quality cuts in a wide variety of plastics. Thin kerf. Very economical.

The Plastic Cutter series offers true quality, variety, and affordability. Designed for general purpose cutting applications, the Plastic Cutter blades will perform very well in a wide variety of plastic materials. Cutting plastics with the wrong blade results in chipping of brittle materials and/or melting of the cut edge. TENRYU Plastic Cutter blades are manufactured to strict tolerances to reduce chipping. In addition, the "no melt" grind pattern on the carbide teeth helps keep heat build-up down and prevents melting. Smooth, clean and melt-free cuts in PVC, acrylics, and other sheet plastics are made possible.

EACH BLADE FEATURES:

• Individually hammer tensioned steel plates for true run.
• Specially selected grade of carbide for excellent work in plastic.
• TENRYU'S super fine honing leaves a mirror-like finish on the carbide for clean and melt-free cuts.

View Pro Series for Plastic

TENRYU proudly carries quality saw blades for plunge cut saws. These blades are suitable for:

• The FESTOOL® TS55 & TS75 machines
• and others

5 years R&D work and study for ultimate plunge-cut saw blades in various applications.

• Resin filled laser cut slots to reduce cutting noise and to reduce vibration
• PTFE coated plate to reduce pitch build-up and to lower resistance
• Select grade of carbide tips for industrial quality jobs
• ATAF shear face grind for splinter-free cross cuts

New standard kerf design (.073"/1.8mm) for all newer FESTOOL track saws (TS55FEQ, TSC55K, HKC55), also suitable for other major power tool branded 6-1/2" track saws.

*These blades are suitable for FESTOOL track saws and other brands' 6-1/2" track saws

*These blades are suitable for FESTOOL track saws and other brands' 6-1/2" track saws

Blades for KAPEX

• Unique tooth geometries provide optimum cutting results over OEM offerings
• Resin-filled laser cut slots reduce cutting noise and vibration
• Diameter and arbor specific for perfect fit

USE LUBRICATION when cutting!!

Plus X Thin Kerf Technology is available for cordless and corded metal cutting saws. Now experience even less effort with more cuts per blade than ever before.

Cord-Free Series PLUS X- For battery powered circular saws.

Heavy Metal Series PLUS X- For corded, or battery powered circular saws.

Please note all safety instructions before use and adhere to instructions for maximum RPM speed. 

ALWAYS WEAR EYE PROTECTION that meets ANSI Z87.1 requirements and properly FUNCTIONING UPPER and LOWER BLADE GUARDS.

Power Tool Series for the Contractor

Exceptional features and superior quality, Thin Kerf

TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 12" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.

BLADE FEATURES:

• Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
• High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
• Aggressive rake angles for maximum cutting speed and efficiency.
• Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
• Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
• Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
• Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
• Can be resharpened for extended blade life.