Have questions?
1-800-773-3133
Ask an Expert-
Guaranteed Sharpness
Extremely sharp
-
In-House Experts
We know our products
-
Added Value
In-house sharpening
-
Nationwide Delivery
Free shipping on orders over $250
10" Micro-Kerf 40T x 1/16" Table Saw Blade MK1040625
2-1/2" Cutting Depth
A 10" diameter, 40T, 1/16" kerf (0.061") all-purpose, carbide-tipped circular saw blade for cutting hard and soft woods plus most plastics. It works excellent in glue-line ripping, cross cutting applications, table saws, chop saws and miter sawing. This blade also cuts excellent in the cheap, under-powered, portable table saws. Made in the USA.
*Please be advised this blade is not a skim-tooth cutting blade. For example, slightly trimming the side of a board without using the full kerf will cause the blade to flex. See the 10" Micro-Kerf Deep Cut Saw Blade (3-1/4" cutting depth) for heavier duty cutting needs. *This blade is not intended for full-depth scoring. Ensure the carbide tips cut completely through your material. If your intention is not to cut all the way through, limit each pass to a maximum cut depth of 1-1/2 inches to facilitate proper cutting without risking overheating of the blade. *If using a sled, make sure the support collars do not rub on the underside of the sled. Due to its extremely thin kerf the saw blade will wobble and give an improper cut if it rubs on anything.
View Micro-Kerf® Chart
How Our Micro-Kerf® Blade Compares to the Industry
See how our ultra-thin Micro-Kerf® 10" blade outperforms common alternatives — from standard 1/8" general-purpose blades to 3/32" thin kerf models.
| Feature | Micro-Kerf® Blade (1/16") | Thin Kerf Blade (3/32") | Standard Blade (1/8") |
| Kerf | 1/16" (0.061")” | 3/32" (0.09375") | 1/8" (0.125") |
| Material Waste (per foot) | Minimum | ~50% more than Micro-Kerf® | ~100% more than Micro-Kerf® |
| Ideal For | General woodworking, bulk cutting, framing, precision cuts, finish work, minimal waste |
General woodworking, less precision | Bulk cutting, framing, rough work |
| Cutting Resistance | Low – less strain on motor | Moderate | High – can bog down smaller saws |
| Sawdust Reduction | 50% less than 1/8" blade | ~25% less than 1/8" blade | Highest sawdust volume |
Related Products
10" Micro-Kerf 40T X 1/16" Negative Deep Cut Table Saw Blade MK1040625-5DC
10" Micro-Kerf 40T x 1/16" Deep Cut Table Saw Blade MK1040625DC
12" Micro-Kerf 60T x 1/16" Table Saw Blade MK1260625
12" Micro-Kerf 60T X 1/16" Negative Table Saw Blade MK1260625-5
12" Micro-Kerf 60T x 1/16" Deep Cut Table Saw Blade MK1260625DC
